ChromecastHelp

Chromecast Does Not Upgrade? Check Out Possible Causes And Solutions

chromecast help

Chromecast may display a common error that prevents an update from ending and locks the device in the process. In certain cases, the device may loop when fetching an update and not leave the “Seeking update” screen, which is stagnant at 0% or other unfinished value. In more serious situations, the Google dongle that turns the TV into smart has chances of getting the screen black after downloading a new package.

The problem may be related to the power supply, the Internet connection and even the model of the router you have at home. Here are five tips on what to do when your Chromecast does not update by the conventional method and crashes.

Check the connection

Chromecast is nothing without an active Internet connection, and so is the upgrade procedure. Make sure your home Wi-Fi is on by running speed tests on your phone or computer. Use services such as Fast and Speed ​​Test to check connection status. If there is any signal failure, the update will not complete.

Check power

Chromecast can be connected directly to the TV via USB port, but this method may fail on branded or unknown old TVs. In some cases, the television may fail to provide electricity or offer the wrong specifications of the USB standard. To avoid possible power failure, always choose to plug your Chromecast into the outlet with the official adapter that comes in the box.

Restore Chromecast

After you verify power and connection, restore your Chromecast to the factory settings to exit the update screen and re-use. If the device is locked, press the physical button on the device for approximately 10 seconds to force the device to restart. After a few seconds, Chromecast will be ready again. Set up on your Wi-Fi network, as if it were new, and retry the update to check if the problem has been eliminated.

Reconfigure the Router

Lack of Chromecast accounting with some routers working on the 5 GHz standard may interfere with upgrading. If your router is listed below and is configured for a 5 GHz frequency channel, you need to reset it to the default 2.4 GHz Wi-Fi standard. Thereafter, the update should normally be downloaded on your Chromecast. After the procedure, it is possible to return to the 5 GHz frequency on the router.

The following router models are incompatible with Chromecast updates on 5 GHz networks:

  1. TP-Link Archer C7 v1 / v2
  2. Netgear R6100 / 6200/6300
  3. Asus RT_AC66U and RT_AC68W
  4. Buffalo WZR_D1800H

Force update

If the above procedures fail, you can still use the computer to force an update on Chromecast. Make sure your PC is connected to the same Wi-Fi network as Chromecast, and follow the walkthrough:

Step 1. Download and install the Google Home mobile app. Open the program and touch the “Devices” menu to see your Chromecast listed. Touch the top menu of the device in the app.

Step 2. Select the “Settings” option and scroll to the end. Write down the number next to “IP”.

Step 3. On the computer, open mobile appfrom the Start Menu.

Step 4. Copy the code below and, where it reads “Chromecast IP,” replace with the numerical sequence obtained in the Google Home app. Then press Enter.

Invoke-WebRequest -Method Post -ContentType “application / json” -Body “{” params “:” ota foreground “} ‘-Uri” http: // IPDOCHROMECAST: 8008 / setup / reboot “-Verbose -UserAgent” curl “.

Step 5. If your computer and Chromecast are connected to the same network, the Google device will restart the upgrade process – this time with a lower chance of failure.

Leave a Reply

Your email address will not be published. Required fields are marked *